Question about PIXMA MP600 all-In-One InkJet Printer
...cleaning results by printing Nozzle Check Pattern after each cleaning. Cleaning and Deep Cleaning consumes a certain amount of ink. Only perform a cleanings when necessary. Print a Nozzle Check ...
Question about X5150 All-In-One InkJet Printer
...cleaning the print cartridge nozzles, dried ink may be on the nozzles or contacts. To wipe the print cartridge nozzles and contacts: 1 Remove the print cartridges. 2 Dampen a clean, lint-free cloth ...
...Nozzle. Step 2 : Cleaning the Print Head. a) Cleaning the Print head using RESUME/CANCEL button. i) Ensure that the printer is on. ii) Hold down the RESUME/CANCEL button until the POWER lamop flashes ...
...nozzle pattern (Head Cleaning needed): Head Cleaning Head cleaning is required when the nozzle pattern is not perfect. Usually, this action is needed when you have printed a lot or you have taken out ...
...cleaning is completed, the LED returns to the copy standby mode. To check the print head condition, print the nozzle check pattern. See " Printing the Nozzle Check Pattern". If the problem is not ...
...nozzle the Q- tip is for cleaning all the exterior surfaces. Now that you have gone this far you need a compressor and an air gun to blow high pressure air backwards and forwards thru the nozzle this ...
...cleaning the print cartridge nozzles, dried ink may be on the nozzles or contacts. To wipe the print cartridge nozzles and contacts: 1 Remove the print cartridges. For help, see page 38. 2 Dampen a ...
...nozzle page prints, forcing ink through the nozzles to clean the clogged nozzles. Print the document again to verify that print quality has improved. If print quality has not improved, try cleaning ...
...nozzle page prints, forcing ink through the nozzles to clean the clogged nozzles. Print the document again to verify that print quality has improved. If print quality has not improved, try cleaning ...
Question about P4350 All-In-One InkJet Printer
...Cleaning the Print Cartridge Nozzles: 1. Open the Lexmark Solution Center. Click Start > Programs or All Programs > Lexmark 1300 Series. Select Solution Center. 2. From the Maintenance tab, ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions