Questions & Answers for: cleaning brass vinegar

Question about Espresso 889 Espresso & Coffee Maker

1 Answer

...brass bristled brush (I think it is a suede brush).It is the only thing that seems to get in the holes.I can't get it completely clear but it does seem to do the job.I also thought of getting a gas ...

Ad

Question about 52067 Handheld Steam Vacuum

3 Answers

...vinegar and put it into the water compartment and let it set for a day and then try running your machine. From now on, only use distilled water in it. Or you can take the Scunci Steamer Model S3888 ...

Ad

Question about 52067 Handheld Steam Vacuum

4 Answers

...brass of grease and this method prevents any gas burner holes becoming clogged. Make sure you use a pan that won't become damaged by the lemon - I use a glass one. [It cleans that too!!] you can try ...

Question about Antique Copper Kitchen Sink Strainer Drain & Stopper

1 Answer

...vinegar, steel wool or a buffing wheel are required for heavy-duty copper cleaning. Once your piece has a good shine, spray with a brightening product to maintain the clean, bright finish. Dust ...

We have an Ondine Hand Shower. Ondine Interbath 112.18.1M 25GPM/9.5 LPM MAX and the head is clogged and we do not get a full spray - How do I clean it? S. Seipp Either remove it and soak it in CLR ...

Question about Mosquito Deleto Octenol Refill 2960-601

1 Answer

brass fitting between the two hoses that connect to the two together, the pin hole in the fitting is probable plug and the gas cannot get in. I soak mine in vinegar and use a straight pin to clean it.

Question about 28496931 Clubmaster Shower Head Polished Brass

1 Answer

I have a shower head # 28496931 . The message does not pulse what should I do She just needs clean up/out. remove it and take it apart and soak it in 50/50 mix of water and white vinegar (for an hour ...

Question about Interaktiv 2-Jet Handshower, Polished Brass

1 Answer

there is very little water coming out of the head. how do i take the head off Check out the connection line to the hand held shower. Take it appart and check out the screen and make sure it is clean. ...

Question about Brass Showerhead

1 Answer

Head is clogged. It is Interbath A112.18. How do I get it apart to clean it out? Thank you! There is no need to take it apart. Let it soak in a "bath" of vinegar. Do this over night and then put the ...

vinegar over night if you have to. Use a brass brush that can be found at any auto store to remove any rust or clogs that you see. It's possible the gas control valve my have an issue as well. Most of

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you a Coffee Makers & Espresso Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...