...rollers. What can I clean them with. hi im jules_09,is it all the fuser area?to be safe try cleaning it first with alcohol,if the that doesnot work try metal polish,just be sure its not the opc drum ...
Kodak easyshare plus series 3 My printer will not feed the paper. I have cleaned the roller and it still does not work. What should I do? There is dust, dirt, or debris on the feed roller, and it is ...
...Clean Rollers" What rollers am i supposed to clean? and how do i clean them? Well, If you get this message you should reset the cleaning counter. When this message occures, push both arrow buttons ...
Question about EASYSHARE 5300 All-In-One InkJet Printer
...rollers, as though the ''grabber'' roller was failing. I tried ''hand-feeding,'' which seemed to work sometimes, although that was a pain. Today I can't hand-feed or get the printer to accept the ...
Question about EASYSHARE Plus Series 3 Thermal Photo Printer
...clean. IMPORTANT: Unplug the power before cleaning the feed rollers. Unplug the AC power cord from the power outlet. Remove the paper tray from the printer, and leave the paper tray door open. ...
Won't collect paper I have to manually feed paper in. I have cleaned the rollers with rubbing alcohol but that did not work. look at the rollers and see if they have cracks you may have to put a ...
...clean the rollers. If that does not help, use cotton swabs with alcohol to clean off any residue left on the rollers. 2. Replace the rollers. Part numbers can be found here: parts You can order the ...
...The coating also seems to have some wrinkles in many pictures. Is there a solution to this? Try cleaning the paint roller. 6 Care and maintenance Cleaning the paper feed roller To prevent
...that there is a roller mark (ink on the roller) on the paper after printing.What can I do or use to clean the roller? Best bet would be rubbing alcohol followed by lightly soaped water. The alcohol ...
troubleshooting I get a line on image. I cleaned rollers and calibrated It's not rollers. Try taking the glass guides out and cleaning them. Then calibrate. If that doesn't fix it then cleaning ...
Usually answered in minutes!
1,024 Questions
996 Questions
1,049 Questions
812 Questions
732 Questions