Questions & Answers for: Evolis clean rollers

Evolis Pebble Cleaning Kit I have an Evolis ID Card Printer, and I am trying to run a cleaning card through it. I followed the instructions on the factory cleaning kit for this model printer, but it ...

... ive tried to research solutions to the problem but have not discovered anything helpful. any ideas? what components are most likely to go bad? Clean all rollers Check if print head is mounted ...

...prints 2 cards. I have an Evolis Pebble 3. Clean all transport rollers . check for X offset by giving Rx command in Properties/Tools/dialoge with printers. Increase offset little bit using Px ...

clean Rollers and print head . Check if you have increased luminosity and contrast too much in printer Graphic properties. If this doesn't solves your problem increase x offset little bit using Px

...and press front panel button and keep it pressed with top cover open . All Rollers will start moving and you can clean them easily using cleaning kit. Also check for thickness adjustment

...cards. Check in driver settings also if you have selected for manual feeding. You may need to clean the Roller situated at

problem with automatic feeder. Clean the Roller below the feeder with a cotton cloth soaked in Isopropyl alcohol also check the thickness adjustment pointer near feeder . Normal ISO standard cards are

...Clean all Rollers including one roller below the feeder. For cleaning Rollers you can take out ribbon and press the push button on front panel. This will move Rollers and you will be able to clean ...

Pls How do i resolve Primacy mechanical Error and is making an usual noise compare to the normal sound When the printers make unusual noises and stop functioning, it is usually an indication of a ...

I put the cleaning card in, I follow the direction to use, it comes on, but does not pull the cleaning card in. As you said you followed the recommended direction, I'm assuming you've set the ...