Questions & Answers for: clean pitch control

...clean the pitch control sliders??? ok ive also seen this problem many times and i have solved it many times also by simply cleaning the contacts (metal strips) i use "servisol super 10" switch ...

...pitch control apart, and clean the contact fader inside. Desoldering is required for this. But it's a more thorough cleaning. Helpful tips can be found here: www.djproaudio.com/Help Or, you can just ...

...back and forth it doesn't stay still. Please advise You have to have the pitch control cleaned or replaced. - OPTiC DJ Equipment Repair Videos DJ Equipment Repair DJ Equipment Sales Numark ...

...down. Please responsd [email protected] You more than likely have to have the pitch control replaced or cleaned. - OPTiC Technics Repair Videos Technics DJ Repair DJ Equipment Sales Technics ...

...pitch control knob/shaft is slightly bent? Any physical damage? Other than that, there isn't a whole lot you can do, unless you replace the pitch control - Technics Pitch Control. - OPTiC Technics ...

...Pitch Control Fader - might need to be replaced or cleaned. I would try cleaning first, by opening it up, and if that doesn't work, then replace. Replacing requires soldering. If your not comfortable ...

solve w/out buying new units? Thanks in advance for help!! More then likely the pitch controls need cleaned. Try cleaning with a good lubricating spray like Craig's Deoxit

cdj 800 mk2 pitch shifts, so tunes run out of time every 5 seconds or so.... didn't have this problem a month ago.... ideas?? Clean pitch slider REPLACE PITCH CONTROL.

t be slowed down The pitch control need to be cleaned. You will have the remove the bottom to do this. It will require servicing. It could also be PCB board that that controls the pitch or a bad motor

...clean but now is the pitch counting from 90 to 0 and down and back again ! is there a way to reset this ? I would try simply unplugging the unit from the wall power and leaving it unplugged for about ...