Questions & Answers for: clean nozzle green machine

...green and yellow. Text print in black is ok. I have tried all the posted remedies like soaking, head cleaning, etc. and nozzle cleaning does nothing. I have also replaced the individual tanks a few ...

...color metal valve mounted on a white plastic frame. Remove it out of the unit and clean the clear tubing fittings. At least on my unit, the nozzle inside the fittings is blocked with green

...printed by your color cartridge. That happens sometimes depending on what else is on the page. Try cleaning your nozzles, or if the ink is low, replacing the cartridge. ...

...Clean Spray Nozzle Check/Refill Tank Clean insert at bottom of Clean/Solution Tank Gently lift Clean/Solution Tank while depressing the Spray Trigger OR Gently squeeze clean tank while depressing ...

...nozzle. Spray it out well. If it's all gunky, then spray some cleaner on it such as Simple Green. I also use a toilet brush to clean my machines. Set it out in the sun and let it dry well before ...

...nozzle, the green light starts blinking again and does not ever stop. I have cleaned and reinstalled the brew unit. I have checked and filled the water to the max. But neither helps. I had just ...

How do you remove and clean the clear piece off of the nozzle? try this linkhttp://www.vacsite.com/images/product_user_guides/bissell/bis20-e.pdf

...You should have a unblocking tool. If not jst use a needle to clean the nozzle. Dont keep trying to run it while its blocked as you may burn out the motor and you may have already. Hope this

...made to use the application trigger it's still spraying constantly and at normal flow. If you have any advice I would be greatly appreciative -The nozzle stuck open. Check and clean. Good luck ...

...nozzle on my little green machine. looks awful. Holding tank needs washing out can I just use dawn and let it soak. Nozzle is the worse thing If its just the nozzle, soak it in a mixture of Dawn, ...