...Living Air Classic XL-15 and cannot get the fan to turn on. The green light is on inside, the fuse seems fine, the filter is pretty clean, the plate is clean. I replaced the connector on broken red ...
Question about XL-15 Air Purifier
...Air Living Air XL15 not producing Ozone or Deodorizing. New plates My Alpine Air Living Air XL15 is not producing Ozone or deodorizing. I've cleaned the machine, lubricated the fan and installed new ...
Living Air XL (no smell) My machine produces no smell. The fuse is good and the fan works--although I did notice that the two little lights near the glass plate doesn' come on. Can you help me? ...
Living Air XL 15, no ozone Trying to help a friend. Unit was not emitting ozone, and fan was very sluggish. Replaced fan and cleaned lint filter. It now runs properly. Ozone plate didn't look dirty ...
...plates and fans are both good. Thanks Mine has a switch lower right hand side that will stop the ozone. HI,I HAVE A LIVING AIR XL-15 S,SERVICE REQUIRED LIGHT IS ON,UNIT IS CLEAN ,BUT NO ...
Question about Living Air Classic Air Purifier
...Living Air > XL15 > everything works motor, fan, BUT ..... there is no clean smell coming from it - everything appears works .. but i can not smell the ION Clean Air ? look through the front grill ...
...living air xl-15 prove it light does not come on anymore and it seems that the unit does not prodoce ozone. I tested the light in the normal postion set at 12:00 with the plate out but to no avail. ...
...clean the plate with l part amonia and 1 part warm water. We also lost instruction manual and can't find one online. OK- The plate needs brushing with a bristle brush to get the oxidized crystals ...
...Living Air machine - the green light does not come on just the amber one. I don't smell any ozone odor. Cleaned the plates but not sure if they have to be installed in any special direction. How ...
...Living Air XL-15 fan but no go. I cleaned everything, replaced the fuse, replaced the spade clips and ceramic plates. I even put direct current to the fan and it worked. But after full assembly, fan ...
Usually answered in minutes!
271 Questions
141 Questions
164 Questions
134 Questions