Questions & Answers for: clean labels shredder

clean out paper parts from the teeth. I have shredded some papers with labels attached (sticky) and do see very small parts of label attached to the teeth. I tried to remove them all to the best of my

Ad

clean out paper parts from the teeth. I have shredded some papers with labels attached (sticky) and do see very small parts of label attached to the teeth. I tried to remove them all to the best of my

Ad

Question about OD1200 Shredder

1 Answer

...clean out some stuck paper, probably including a staple There are two additional screws under the labels. You can feel the holes under the labels with your fingertips. Cut a hole in the labels to ...

Question about 0M96431 Shredder

1 Answer

labels, spray more of the stuff on the cutters and clean them with a brush, to remove glue residue between them. Do it several times, rotating the cutters to remove the glue all around. Then lubricate

...clean the switch from the inside? Never mind providing help, I fixed it myself. There is a seventh screw hidden under one of the adhesive labels. I removed that screw and was able to disassemble the ...

...Shredder jammed. Now the blades don't turn. I tried to take the top apart but couldn't get the cover off. I removed all the screws but It wouldn't come off. Is there a clip or tab that I need to ...

Question about HT100 Shredder

1 Answer

...packed with paper and label glue got stuck on the cutting mechanism that initially stalled it. I cleaned off the gears and oiled it, then found a gear out of alignment. I adjusted the gear back ...

...labels. I used a card with the stiffness of a credit card and clean off the residue underneath and around the shredded paper drop zone. I then vacuum the inner area of the shredder and then sat the ...

Question about Cross-cut Shredder

1 Answer

...clean some shredded paper in the shred area that was stuck, and now shredder won't work. Disconnect the shredder Turn the top unit over to reveal the 'teeth' With a pair of needle-pointed ...

...labels through her EPS-611x,. Now the shredder is clogged up. I have been able to pull some of the paper out but want to know if there's a way to clean it. Not unless to dismantle the shredder to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...