...10-20 loops appear on bottom of project. Often will stop sewing completely. Check your threading. Berhaps your thread is not between the discs. To address my needle thread tangling (horribly) in the ...
Kenmore Sensor Sew 70 It is model 385.1950281. The feed dogs are clean enough to eat off of. They are not hitting the plate. I bought this at Goodwill. Brought it home and cleaned and oiled it. I turn
Question about 15218 Mechanical Sewing Machine
...kenmore 385 12712090. It seemed to kinda jam as the needle went up and down, got tight. Now won't go up and down. At the very end of a 10 cushion project. I just want to scream! Take the front cover ...
Question about 15218 Mechanical Sewing Machine
Kenmore machine sews a straight stitch fine for about 10 stitches then it makes a knocking noise and leaves additional bobbin thread in the underneath stitch. Also, the zigzag stitch zigzags for about
Question about 744-08BH Mechanical Sewing Machine
...Kenmore 14 stitch sewing machine that I haven't used in years - when I try to use it, the thread and bobbin thread seems to catch and it won't sew forward take out the thread and bobbin. run the ...
Question about 744-08BH Mechanical Sewing Machine
...kenmore 10 sewing machine. it is clean and have no problem threading etc. but believe tension and settings are off because back of stiching is pulled and "loopy" what are the correct settings for ...
Question about 744-08BH Mechanical Sewing Machine
...10 minutes, and now its doing the same thing. This is driving me insane!!! Any ideas?? take it back also & get your money back & go some place else to get a sewing machine Hi Deborah, I have ...
Question about 15208 Mechanical Sewing Machine
Kenmore model #1813 bought in June or July of 1976, recently ,is not making correct stitch sizes. For a normal size stitch,like a size 10, have to move stitch size clear over to a basting stitch size
Question about 15208 Mechanical Sewing Machine
...Kenmore 10 sewing machine .The bobbin winder won't work after disengaging the clutch ,and the needle still goes up and down. Need more information but it sounds like it is working fine! It is NOT ...
Question about 15208 Mechanical Sewing Machine
...Kenmore 158/900 is not looping the bottom stitch from the bobbin thread and the thread sometimes breaks Can be several causes. In typical probable order for rotary hook machines; 1.Top thread tension ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions