...clean these holes real good. It may be a bit meticulous, but it should take care of the problem. Post back and let me know if this helps. The fabric softener dispenser (and bleach dispenser, same ...
Fabric softener is not dispensing Detergent seems to be dispensing but not the fabric softener. Fabric softener area seems to retain too much water after cycle drain tube stopped up with softener ...
Question about Nexxt 500 WFMC3301 Front Load Washer
...will release fabric softener in the same way. Your washer uses clean water to wash out the dispenser when it's time to release. This is normal and will happen regardless if fabric softener is
...fabric softener dispenser supposed to work? It never appears to dispense. The clothes definitely do not smell like they have any softener on them. I looked inside & there aren't any water ...
Question about Affinity ATF7000E Front Load Washer
...fabric softener compartments. Clean the bottom of the insert and the bleach and fabric softener compartments. Reinstall the insert and put the drawer back inside the washer. To test the siphon action ...
Question about Affinity ATF7000E Front Load Washer
Fabric Softener is left behind in the Fabric Softener Dispenser. How many holes are supposed to be open above the Fabric Softener Dispenser? if its a front loader remove drawer clean well
Question about Affinity ATF7000E Front Load Washer
...fabric softener staying in dispenser. Compartment 3: Additives (fabric softeners, etc.) The fabric softener should not overflow the grid. Cleaning the detergent dispenser drawer Remove the dispenser ...
Question about Affinity ATF7000E Front Load Washer
...If its a combination of water and softener, then the dispenser might be clogged. You can remove the slide out tray and clean it. Look for build up of fabric softener that might be there. Good
...fabric softener slot after the machine is through washing there is water left in the fabric dispenser side of dispenser Fabric Softener Compartment Full Of Water - White Goods ... ...
Question about Affinity ATF7000E Front Load Washer
fabric softener dispenser. If you remove the dispenser drawer and look into the cavity, there should be a series of holes in the upper part of the compartment where water sprays into all the dispenser
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions