Questions & Answers for: clean drum brother hl 1440

...car tire ran over it. the drum is coated with toner. Any hope? Denis you must change a new drum also new toner take the cartridge out, take the refil out, and clean the red roller inside. Worked for ...

...clean my 5240 brother laser printer drum 5240 drum cleaner Chances are if your drum requires cleaning, it could be faulty or at the end of its life. However if you must clean it DO NOT use any ...

...laser printer. Started printing with light gray streaks that go vertically on paper. Words print fine, but background has these light gray streaks. may some dust in corona ware or drum clean the

...drum light came on constant my Brother HL-1440. I changed the drum and also put new toner in, slid the cleaning button back and forth. But I still have the drum light on constantly and the print is ...

dirty print quality It might need to be cleaned with a "special" vaccuum cleaner(OBS! OBS! household Vaccuum cleaners will damage if being used on a laser printer!!) let a service shop perform it! Or ...

...Brother printer and the text prints ok, but the background is not clear white. It looks like the toner is on a roller and makes the background look grey. I did the maintenance procedure, but did not ...

clean. Is there something I can buy I am not mechanically inclined. its the drum or the toner. if you have an old toner run a test with it. If it clears up its the toner cartridge. If not its the drum

and when I pull it out it resembles a accordian, all fan-folded looking. I just changed the ink cartridge and drum not too long ago. Any suggestions? clean the drum . it may help you solve the problem

...clean a Brother HL1440 laser printer? The toner drum/cartridge was dropped when last changed and I am sure the toner contents were spilled. remove drum assy. and remove toner unit off drum then blow ...

...clean corona wire). What you need to do is pull out the drum and look for a blue tab on the top of the cartridge. Slide that tab back and forth along the wire and see if that clears things up. I have ...