density sensor and clean it. Then back in service mode select COPIER then FUNCTION then INSTALL then INIT 4 and let the machine finish its cycle If the code comes back you may have to replace the cyan
density sensor and clean it. Then back in service mode select COPIER then FUNCTION then INSTALL then INIT 4 and let the machine finish its cycle If the code comes back you may have to replace the cyan
...Clean the Black Color Sensor If Prrblem Solved OK otherwise Go to Display- Density And observe Black Color density If it is less Add some toner in DP Do initK if Density is Too high take 10 to 20 ...
density data is computed using SGNL value and REF value in ATR control, REF becomes 0 due to backup data corruption. Clean the ATR sensor window, Check on attachment of the developing unit, Check on a
density data is computed using SGNL value and REF value in ATR control, REF becomes 0 due to backup data corruption. Clean the ATR sensor window, Check on attachment of the developing unit, Check on a
Question about iR 2016i Black and White Copier
density among others what could be the problem and how can it be solved? this machine showed that massage after being taken to the technician. i have tried to set all the settings to default, cleaning
...Density value is extremely high for the ITB surface reflectivity when thenew drum unit was installed. SALT sensor trouble.Replace the SALT sensor (clean the sensor window).YELLOW-Sorry i'm not ...
...density for the target at patch detection= 1. Clean the scanner's window. 2. Use your hand to check if the shutter of the Registration Patch Sensor Unit can be open. 3. Check if the window of the ...
Question about for IMAGERUNNER C2020 C2050 C2058 IRC2100 IRC2100S IRC2105
...clean any areas that refer to a sensor such as density. Give it a good cleaning according to manual. Most of the problems I have had at work are bad toner cartridges. Sometimes the bargains are not ...
Question about for IMAGERUNNER C2020 C2050 C2058 IRC2100 IRC2100S IRC2105
...clean it with dry cloth.Check the visibility and density of the patches on the ITB if abnormal do ..COPIER -FUNCTION-PART-CKECK-SL02 to move SL02. Check the Y drum unit cross check with good Y drum ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions