Questions & Answers for: how to clean copper

Ad

Question about Antique Copper Kitchen Sink Strainer Drain & Stopper

1 Answer

...copper. To clean a copper kettle or boiler, you need to remove soap scum and hard water deposits as well as oxidation. Although a lightly oxidized copper piece can be cleaned with salt and lemon or ...

Ad

Question about Satellite P105-S6104 Notebook

1 Answer

...copper coils with force as prev,but putting my ear to the back I can hear the low whir of the fan you can buy a can of air from maplins to clean keys you can blow it to clean the fan and copper ...

Ad

Question about Reducing Tee Copper X Copper X Copper - 38"X14"X14"

1 Answer

...copper pipe soder flakes away doesnt stick make sure joints are clean and sanded,flux-use mapp gas in torch burns hotter then propane,needed for 95/5 solder preheat up and down pipe for a few inches ...

Question about Icemaker

1 Answer

...Clean the copper plate and you may get a little more life out of the head. reality is the head needs to be replaced. Take the gear off using some needle nosed piers and try cleaning that copper. How ...

...copper It is a 1960 s copper lampshade Copy following link:http://www.wikihow.com/Clean-CopperIf you have old copper penny, or antique copper kettle, then do not clean since that will diminish

Question about Icemaker

1 Answer

...my lamipanel with bleach and it has gone yellow what can i do is made with copper or silver if there is copper you can clean it with lemor and baking soda if contains silver with HLR cleaner ...

Question about 966 All-In-One InkJet Printer

1 Answer

...clean the copper parts of the cartridge The printing error #1203 is still there after I put in a new inkjet cartridge. How can I clean it? Turn the printer on and then fill the paper tray with paper. ...

Question about 966 All-In-One InkJet Printer

1 Answer

...clean/polish copper cabinet hardware These are older If you want to clean or polish your copper cabinet hardware, there are few way to go, like cabinet hardware (Knobs & Pulls) which you believe ...

Question about 966 All-In-One InkJet Printer

1 Answer

6.5 briggs and stratton wont start spark problem no start weak spark Have you cleaned or replaced the plug recently? Sometimes, during cleaning, you can damage a plug's resistor. If you replaced it, ...

...paste, and some copper wire. Practice joining bits of copper until you can do it quikly and without overheating the adjacent area. Then clean up the broken contacts and apply your new skill! Ta

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plumbing Experts

Bill Johnson

Level 2 Expert

306 Answers

Brad Brown

Level 3 Expert

18519 Answers

Tom Chichester

Level 3 Expert

60184 Answers

Are you a Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...