How do i change the radatior hose with no clamps? How do i change the radatior hose with no clamps to attach it to the plastic tube? The hose is busted and I need to cahnge it. The hose your talking ...
re-installed. There should be a clamp that the cable ran thru, then attaches to the auger control. Find this clamp on your snowblower, and route it thru this clamp then attach it to your auger control
clamp the regulator to the door, it's off by about half an inch. Thanks for your help. Its best to attach the regulator to the door frame with the bolts first. Then plug in the motor and run it to the
...there are a number of attachments, hedge trimmer, brush cutter, brush, blower etc, there is a alloy clamp at the bottom of the machines tube, just push the attachment tube into the clamp, there is a ...
how do clamps attach to machine and drain pump? replaced old drain pump and replaced and cannot figure out how to attach clamps to hold drain pump in place i would need to see a picture of what ur ...
Question about 2003 Sierra 1500
...attach so it doesn't leak. I noticed at my local auto parts store, fuel injected hose clamps with a screw and nut to clamp over hose. Wonder if they would clamp better? Help! I know the feeling well ...
Question about 2003 Sierra 1500
clamp tabs to attach clips to,how to fix the sink i got online porcelain dropin has no clamp tabs under rim to attach clips to.how can i fix this Go to Home Depot and buy some sink screws that go into
Question about 2003 Sierra 1500
...attach it to your machine or does the walking foot not work properly once it is attached? The number should fit your machine unless someone inadvertently sent you the wrong foot. If it attaches but ...
Question about 2003 Sierra 1500
...clamp. I'll attach a picture/link to a sufficient clamp- it made a huge difference with mine! Tips and the Wire You Use can make a big difference too! Larger Wire is Helpful Too- I'm talking about ...
Question about 2003 Sierra 1500
...cable, the second black jumper cable clamp, to an unpainted piece of stationary metal on the car with the dead battery. Do not attach this clamp to the negative terminal on the dead car's battery.
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions