Questions & Answers for: Remington where does the clamp attach

pole. I have the sollution, had the same problem with the broken compression nut. Just use two hose clamps, one to hold the pole extended and the other clamps around compression base. Its a cheap easy

Broken clamp on Remington Pole Saw I need the part #121560-01, but with Remington out of business, I have been unable to find it. MTD does not have it and neither do the parts distributors I have ...

Pole Saw RPS96 - - Saw 108526-01 - - The outer clamp/nut that holds the pole at the selected length has split. I guess I could use a clamp to secure it, but I'd like to replace with the correct part. ...

remington 12 inch electric saw, chain came off, cannot find manual to put it back on. I am 73 and need to put the chain back on to cut up the pallets for heat. I need to put it on the right way. A ...

ADJUSTING CLAMP IS BROKEN AND OIL FILLER CAP IS BROKEN AND SHOULD BE REPLACED AND I NEED PART NUMBERS THE TWO ITEMS PLEASE. You can order by calling 1-800-654-8534

the black clamp that holds the extension rod from moving is broke. I would like to know if I can replace it and where can I purchase the part. When you find out let me know. Same problem with mine. ...

How do I put the saw on the pole 1. Remove battery from chain saw. 2. Separate main handle from chain saw power head by pressing both release buttons on main handle and pulling apart. The release ...

...diameter. Go to a hardware store or an auto supply store and ask for a 2-1/2 inch stainless worm clamp. Be sure to get the wider type that is about one-half inch across the stainless band. The ...

...lots of luck there, if you have tried Remington, with no luck may i suggest a automotive hose clamp and a piece of inter

...attach the saw. Once the saw is attached, plug in the power cable that is on the end of the pole. One word of advice....there is a large locking collar ring that enables the two poles to extend and ...