Questions & Answers for: where does the clamp attach

Ad

...attach it? This clamp attaches to either the firewire cable or the USB cable. It is used to reduce electrical noise or interference that can be created by radioactivity or other electrical equipment ...

Ad

How do i change the radatior hose with no clamps? How do i change the radatior hose with no clamps to attach it to the plastic tube? The hose is busted and I need to cahnge it. The hose your talking ...

Ad

Question about 2001 Taurus

1 Answer

re-installed. There should be a clamp that the cable ran thru, then attaches to the auger control. Find this clamp on your snowblower, and route it thru this clamp then attach it to your auger control

clamp the regulator to the door, it's off by about half an inch. Thanks for your help. Its best to attach the regulator to the door frame with the bolts first. Then plug in the motor and run it to the

Question about 2003 Sierra 1500

1 Answer

...there are a number of attachments, hedge trimmer, brush cutter, brush, blower etc, there is a alloy clamp at the bottom of the machines tube, just push the attachment tube into the clamp, there is a ...

how do clamps attach to machine and drain pump? replaced old drain pump and replaced and cannot figure out how to attach clamps to hold drain pump in place i would need to see a picture of what ur ...

Question about 686 Atlantis 1600 Cartop Carriers

2 Answers

...attach I used a wood clamp by placing one end of the clamp on the hinge (while you have it placed over the ball socket mounted on the lid) and the other on the outside of the lid --- then simply ...

Question about 686 Atlantis 1600 Cartop Carriers

1 Answer

...attach so it doesn't leak. I noticed at my local auto parts store, fuel injected hose clamps with a screw and nut to clamp over hose. Wonder if they would clamp better? Help! I know the feeling well ...

clamp tabs to attach clips to,how to fix the sink i got online porcelain dropin has no clamp tabs under rim to attach clips to.how can i fix this Go to Home Depot and buy some sink screws that go into

...attach it to your machine or does the walking foot not work properly once it is attached? The number should fit your machine unless someone inadvertently sent you the wrong foot. If it attaches but ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Cameras Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...