Questions & Answers for: Bernina x clamp

...walking foot goes. Do I attach it to the needle screw? The arm on the foot goes above the needle clamp. Well yeah, but the arm on the walking foot is like a fork with two tines. The needle clamp ...

bernina 830 old style sewing machine. I need to replace the complete cast iron piece and quick lock clamp under the extention table. Table is fine, I just need to replace the under piece, will have it

...presser foot shaft. i noticed that the presser foot was slanted. so we played around unscrewing the clamp, etc. and accidentally dropped it. eventually we got it back together but i'm not sure its ...

...thread breaksneedle may be in backwardsRaise the needle bar to the highest point, then loosen the clamp screw to remove the old needle, place the new needle in the clamp with the flat side to the ...

...thread breaksneedle may be in backwardsRaise the needle bar to the highest point then loosen the clamp screw to remove the old needle, place the new needle in the clamp with the flat side to the ...

presser foot shaft twisted While pivoting a quilt, I caught the walking foot and the assembly where the presser foot attaches to the shaft is twisted You can correct this. Put an ordinary foot on. ...

how do i remove the needle clamp assembly from bernina 1090? Remove the needle bar clamp screw. From the back side of the needle clamp holder, remove the small needle stop screw. The clamp can then be

does not feed through when I was using last. \any suggestions. \thank you It sounds like the needle clamp may be broken, or maybe have something stuck in it. Try viewing with a small mirror underneath

...to rectify this? Have oiled and cleaned, to no avail. Hi Linda: Does your 830 have a black needle clamp and screw instead of the standard nickel plated clamp? If not, the walking foot forked

I have A bernina 780. Trying to change needle but the needle won’t go all the way in order to clamp it in. What needle are u using? HAX1 or 705H Bernina, Schmitz, what size? 90? Is there a broken ...