Cisco disables the trans port as default, have you enabled it in the system? after doing a no shut on it, if it doesnt light still you may have to play around with negotiation, post if it still doesnt
light indicates no connection. Additionally, pls try: check all the connections; source and client; go through the configuration/setting-up all over again; reference the Cisco release notes here. Hope
CISCO 2600 Router Troubleshooting When I switch on the CISCO Router 2600, the response is that only the POWER and RPS LEDs become yellow - with the RPS LED flashing about once in one second. What ...
Question about 3CSFP91 Transceiver
...Cisco 3750 switch via fibre. There is a light on the 3Com end, but nothing at the Cisco end, and no traffic will flow. Have swapped SFP's, have swapped fibre cables, have used a different port on the ...
Question about Wireless-G Broadband Router
...cisco systems supposed to be for my router to be in effect I have the same router and the Cisco Systems is lit up with a white light behind it and it's working fine. The cisco system light indicates ...
Question about (1841) Router (cisco1841)
...Cisco 1841 Router has a single, external compact flash memory. This is the only flash memory for the system and should never be removed whenever ROM Monitor (ROMMON) is being updated with a new image ...
...cisco systems logo), a white color light appears and the rest of the lights just don't turn on. I am wondering what the problem might be. Could the power adaptor have anything to do with it? Thanks. ...
...Cisco 1841 Router has a single, external compact flash memory. This is the only flash memory for the system and should never be removed whenever ROM Monitor (ROMMON) is being updated with a new image ...
Question about Systems - Unified IP Phone Expansion Module 7916 (CP-7916=) Expansion Module
I have added cisco 7916 expansion module to 7965 cisco phone.Now when i started the phone,phone works but expansion module screen shows cisco logo and lights continuously flash. I know it may be late
Question about Systems - Unified IP Phone Expansion Module 7916 (CP-7916=) Expansion Module
...cisco E1000 router system if the default ip address of the router is not working? or if the router is not responding? post the Power Led Sequence.. As initial All the Light Glows and then it Shuts.. ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions