Questions & Answers for: cisco ip phone configuring

Ad

Question about 7940G IP Phone

1 Answer

Cisco 7960G IP Phone Problem I've got a Cisco 7960G IP Phone setup to use Asterisk 1.4. I'm trying to change the firmware to SIP 3-8-6-00. I've setup my DHCP server and it's giving out the IP address ...

Ad

Question about 7910 IP Phone

1 Answer

cisco ip phoe Hi, Does anybody knows how to configure the cisco ip phone in sccp. Using chan_sccp tge phone can log in and has line tone. i could able to call from cisco ip phone my soft phone But the

Ad

Question about 7912G IP Phone

1 Answer

Cisco 7912G IP Phone how do you shut off CM Fallback Service on the Cisco 7912G IP Phone You can not shut off CCM CSRST fall Back service. You need to either remove SRST reference in the device pool ...

Question about 7941G-GE IP Phone

1 Answer

Cisco IP Phone 7941G that is using firmware SCCP 41.8-3-2S cannot resolve the Cisco CallManager host name and therefore does not provide a directory number Try configuring CCM IP address either trough

Question about 7912G IP Phone

2 Answers

...CISCO ip phone 7912G with ccme Here is the manual on how to Configure CCME, and this will apply to your 7912G. :) My phone cuts in and out. I am hooked up to a Rogers Rocket Hub with a static ip ...

Cisco IP Phone 7940 and 3com nbx as 3rd party SIP phones Cisco IP Phone 7940 Also the polycom Soundpoint IP 330. Can these phones be used on the NBX as SIP phones I was able to install the 3cx ...

Question about 7910 IP Phone

1 Answer

Cisco IP Phone 7910 How to set a Cisco IP phone to factory default Reset configuration of Cisco IP Phone (7910, 1911, 7940, 7941, 7960, 7961) To set the Cisco IP phone to factory default completes the

Question about 7910 IP Phone

1 Answer

cisco ip phone 7910 Press **# in order to unlock Network Configuration on the phone. Press Settings. Press 3 on the keypad (or scroll down) for Network Configuration. Press 33 on the keypad (or scroll

Question about SPA 303 3-Line IP Phone with 2-Port Switch and LCD Display (SPA303G1)

1 Answer

...cisco ip 303. Now is in factori reset and i dont now how i cant configure again. I can find my ip addres, now is only o.o.o.o. An i can go in my administrator portal. Thanks you. I hope below link ...

can i make calls with a Hide ID? cisco ip phone 7960 series You will need to configure this through whatever SIP gateway you are using, it is not configured through the handset.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...