Questions & Answers for: chrysler pt cruiser fuse box

...PT cruiser. Turned on headlights and they didn't come on. The instrument lights are also out along with the power door locks. all fuses are good, inside and out. Anyone have this problem. Need a ...

Ad

Question about 2004 PT Cruiser

1 Answer

fuse box: might be in engine near battery or below steering wheel. open top and check for blown fuses. Try replacing if blown fuses are found. If all fuses are OK then it is very unlikely that all the

Ad

fuse box on the inside behind the fuse box there is a gray connector. check the red/white wires on either side of the connector for 12 volts. if no voltage on either side replace 40 amp fuse in engine

Question about 2002 PT Cruiser

1 Answer

...pt cruiser wont starts and it act likes the battery is dead, but it isnt. what could be the problem? check battery connections1st check all fuses under dash and under hood in the black box. it will ...

...PT cruiser's (Front & rear Wiper, headlights & indicators) stopped working, have not been able to identify the root cause of the problem, this has happened for the 3rd time now in 3 ...

...pt cruiser I found the fuse box behind the battery, and the head light still does not work. Is there another fuse box that will fix this problem? headlight could be burned out ! you will need to ...

...PT Cruiser and a couple of months ago both of my headlights went out. I change both bulbs but they still didn't work they only work on high beam can anybody tell me what the possible problem could be ...

...PT Cruiser? I have no headlights, parking lights, or brights. The interior dome light comes on normally. All headlight-related fuses are okay. Trying to locate the headlight relay - it is not in the ...

...PT Cruiser fan would not turn off after 45 minutes thus battery drained It's a turbo, has always started right up. Weather temp cool, no special coolant in reservoir. Seems like something draining it ...

...PT Cruiser. The car cuts off. What could this be? Check the alternator output voltage it should be 13 VDC to 14.5 VDC. The tipm - totally intergrated power module controls lights an other electronic ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...