...I used bolts to put the motor back on the arm, but had to buy the big pop rivets and a big pop rivet gun to put the door back together.. All in all a big PIA.. I would take it to a shop..
...pop rivet to remove the handle. I usually use a small bolt to hold the new handle in place. Be carefull when drilling out the pop rivet! Roll the window all the way up so when you drill through the ...
How to take window motor out of driver's side door ? They have very large pop rivets that hold the motor on from the factory. You have to drill the pop rivets out and this will free the motor. Once ...
...Pop Rivet tool and of course the new rivet. The alternative to purchasing the tool and the appropriate size rivet. (Some hardware stores sell the rivets in different sizes by the each). Take the ...
how to remove power window motor Some motors are pop riveted to the door panel. With the window up remove the the arm rest screws then remove the screws hidden by the arm rest. Next use a special tool
...My mower, however, had pop rivets holding the cover on the engine, so if yours does too, get a pop rivet tool with the correct size pop rivets before you start drilling out the old pop
Question about 22" Yard Machine Push Mower
...to see if it is bolted on or pop riveted. If it's pop riveted you'll have to drill out the rivets to get at the cord. Have a pop rivet tool and the proper sized rivets ready to re install the ...
Question about PLMV169DC Microwave Oven
...pop rivet tool and 1/8'' or 3mm rivets. Second remove the door. There is a little plastic pop tab on the inside top corner of the door by the hinge that keeps the door from lifting off of the hinge ...
How to replace spiral rubber that are riveted on? Pieces of old conveyor belt, a craft knife, a drill and a pop riveter. Is what I would do. Or you could drill the old pop rivets out and use stainless
Question about PLMV169DC Microwave Oven
pop rivet tool and some replacement pop rivets of the correct diameter before you drill out the rivets in the cover. If the cover has bolts holding it on, then just remove the bolts to uncover the the
Usually answered in minutes!
307 Questions
294 Questions
248 Questions
202 Questions
187 Questions