Questions & Answers for: choke cable removal

...choke cable on a yamaha fazer is it much of a job to change the choke cable on a yamaha fazer 1000 ? choke cables normaly last for ever, so it prob needs just a bit of oil. remove upper end of cable, ...

...choke cable and, basically, make sure it does not get kinked or pulled tight when the handlebars are turned from side to side. Then, remove any excess free play in the cable by turning the adjustment ...

choke cable from the carb end a 250 Yamaha virago?this thing jams with regularity and I'm really jack of sending it to a workshop to be done. Hi- I've had huge problems with choke cables jamming on my

...choke cable on 2001 fxdwg yes, you must remove the carb to replace the choke cable. The cable has a plastic piece that screws into the carb body. Since it's so close in that area, it's just easier to ...

...choke cable is there but not installed the cable just hangs. Does any one know how to fix the choke cable on a 2001 Yamaha r6 ? hi, this is the best way to replace the choke cable, first remove the ...

...choke cable on 05 fxd dyna h/d I thought I wrote this one up. But, you have to take the carb off to get the choke cable out. Once you get the carb off, you can take a 14mm wrench to remove the choke ...

Choke cable. It's on the left side of the mower when you open the hood and remove the air cleaner you should see it. These mowers are famous for having the choke cable come loose. Push the cable lever

...choke cable on 2001 barley fxd To change the choke cable, you must take the carb off the engine. Remove the air filter and backing plate. Take the nut off the backside of the choke cable and let the ...

...choke cable on a 2005 yamaha viagra, 250 cc not sure how to do this Remove the Phillips head screw under your choke lever and retrieve the wave washer and other small parts there. The cable, with a ...

...choke cable and manually operate the choke lever until you are able to replace the cable. Depending on the severity of the bend in the cable, you may also be able to straighten the cable housing out ...