Question about Stylus CX5400 All-In-One InkJet Printer
...clean 7 times in a row and then a head test and it has worked for me several times on other printers (not an expert here, just personal experience). Additional note, I have seen both cleaning ...
...print I have this printer that had not been used for a while. And the head is cloged. I want to remove the head and clean it with a cleaning solution. How can I remove the head from the printer? I ...
Question about Stylus CX6400 All-In-One InkJet Printer
...clean any ink residual that could interfere with proper function of the printing head. If this doesn't work you probably have to replace the head. Check also the flat cable that follows the printing ...
Question about Stylus CX6400 All-In-One InkJet Printer
...on the printer maintenance,probably the print head is already clog if you can buy a chemical solution for print head in your area then buy it,just contact me if you have it and i will teach
Question about MX700 Office All-In-One InkJet Printer
print head needs a chemical solution. You have to soak it to chemical solution to unclog it. It should be a chemical solution that is really use for print head. If it does not work, the worse thing to
Question about PIXMA iP4600 Color InkJet Photo Printer
...clean the print head of a canon ip4600? I bought acetone but it does not get the ink off my fingers so I am thinking not the right cleaning chemical. The large black cartridge does not work. I use to ...
...clean your printhead? There are many solutions for this, but a simple way of getting ink to flow again is by using Boiling water. Remove the cartridges from the printer, you can see the print head on ...
...chemicals. If it is a compatible cartridge you have used then it is possible to get a failure. Most are re-manufactured and are not 100% Reliable. Also make sure the contacts on the inside of the ...
...print head on the cartridge must have gone bad. You can also take it to the local cartridge refill store like The Cartridge World. They will clean it for you using some chemical. But if its physical ...
...print head you will see copper contacts- clean them with alcohol or other such chemical. Look in machine where the print head was and you will see more copper contacts- carefully wipe them with a ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
