Check toner cartridge Just about every time I go to print something I always get "Check toner cartridge 543:K toner sensor error" I have taken it out, cleaned it, everything I can think of and I still
...check toner. 543K toner sensor error. I red the manual and cleaned the sensor on the body of the printer by using an air spray, then I cleaned the hole on the toner cartridge by the same way and the ...
...toner and re-seat the drum assy check for foreign objects under toner/drum assy make sure toner is locked and drum is seated correctly also, check the small door on the left side of drum if stuck ...
...smudges. Clean with swab. 3) Remove all toners/drums and check for spilled toner. Vacuum or wipe clean. 4) Check tansfer belt for marks, stray toner, creases. 4) Re-seat toner and drum
Check the appropriate toner cartridge lock lever (Shown below) and make sure that it is in the correct position. CORRECT POSTITION INCORRECT POSITION Check both transfer belt lock levers (Shown below)
check toner cartridge black. Toner Sensor Error Hi Thanks for using FixYa. Toner sensor error is related to the agitator inside the toner cartridge, it occasionally falls out of its housing so it does
...check toner cartridge 542: C toner sensor error try a different toner first .... doesn't have to be a full one ... just a different toner box. had the same on a machine and it was only a bad toner ...
check are the toner sensors. These are small and located to the right of each toner cartridge in the wall of the printer, one could be dirty creating the error and not allowing the printer to start up
...toner duct for ID is not operating properly. Check to confirm that the basket assembly is in position (if it is engaged with the gear of the printer). Check to confirm that the holder magnet D ...
Usually answered in minutes!
172 Questions
152 Questions
147 Questions
126 Questions
93 Questions