Questions & Answers for: how to check ldp

Ad

Question about 1999 Grand Cherokee

1 Answer

...check the vacuum to the LDP. IF it is ok, you will need a wiring diagram to check the battery voltage, and the control wire, and the switch state wire to the LDP. If the wiring to the LDP is good, ...

Ad

...check engine light - code po456/evap sys small leek. tried new fuel cap, light still on. What hoses can I look for to find a leak?? or could it still be fuel cap and sensor needs reset? Customer ...

Ad

Question about 2001 Grand Cherokee

1 Answer

...check valve pumping air into the evaporative system. The LDP reed switch turns from open to closed, allowing the PGM to monitor LDP pumping (diaphragm up/down) activity. During the pumping mode, the ...

Question about 2001 Grand Cherokee

2 Answers

...for pinches or kinks prior to any LDP component replacement. The supply vacuum lines should be checked from the engine compartment all the way to the fuel tank, including the LDP and purge

Question about 2000 Grand Cherokee

1 Answer

Check the vapor/vacuum lines at the LDP; LDP filter and EVAP canister purge solenoid for damage or leaks. If a leak is present, a Diagnostic Trouble Code (DTC) may be set. Connect electrical connector

Question about 2001 Grand Cherokee

1 Answer

...check valve pumping air into the evaporative system. The LDP reed switch turns from open to closed, allowing the PGM to monitor LDP pumping (diaphragm up/down) activity. During the pumping mode, the ...

Question about 1997 Grand Cherokee

1 Answer

...LDP switch may be bad or the pump itself has a problem. Check the pump, the wire connections, and the hoses attached to it. LEAK DETECTION PUMP (LDP) OPERATION The Leak Detection Pump (LDP) is used ...

...for pinches or kinks prior to any LDP component replacement.The supply vacuum lines should be checked from the engine compartment all the way to the fuel tank, including the LDP and purge ...

Question about 2005 Ram 1500

1 Answer

...system leaks and blockage.During the self-diagnostics, the Powertrain Control Module (PCM) first checks the Leak Detection Pump (LDP) for electrical and mechanical faults. If the first checks

...system leaks and blockage. During the self-diagnostics, the Powertrain Control Module (PCM) first checks the Leak Detection Pump (LDP) for electrical and mechanical faults. If the first checks

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23424 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...