Questions & Answers for: how do you check the lamp

check if the lamp looks ok visually. Soon after putting power ,you should hear the color wheel spinning at high speed then the ballast should start the lamp.If the lamp still does not light then check

...check your lamp. is it open inside or became open due to some reason.. its new but you have to check its continuty and then plug it again properly if fine regards, this is a more serious matter in ...

...the exposure lamp, lift the cover press print the scaner lamp should on otherwise this lamp is defected, now to check fuser lamp, you have to removed fuser unit, use ohm meter to check its

...lamp lights: Check the harnesses and connectors between the CCD unit and the MCU PWB. When the lamp does not light: Check the harness and connector between the copy lamp and the MCU PWB. Replace the ...

...Check the lamp colling fan is it working or not. Also check the connection on the lamp holder is proper or not, possibility of connector burning . then, you have to check the lamp power supply. check ...

is applied . 3. chek the line to the brake lamp/tail lamp assembly . Check the GROUND connection of the lamp unit, check the holders. A voltage absence till the lamp end will confirm the area of fault

...check the copy lamp operations. When the copy lamp lights up. Check the harness and the connector between the CCD unit and the MCU PWB. When the copy lamp does not light up. Check the harness and the ...

...check the copy lamp operations. When the copy lamp lights up. Check the harness and the connector between the CCD unit and the MCU PWB. When the copy lamp does not light up. Check the harness and the ...

...Check the heater lamp blinking with SIM 5- 2. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. When the lamp does not light: Check for ...

...Check the heater lamp blinking with SIM 5- 2. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. When the lamp does not light: Check for ...