Questions & Answers for: Hyundai Sonata check filter

Question about Hyundai Sonata

1 Answer

Can't find the filter help! Double check with the dealers shop. Alot of these newer cars really don't have much of a filter that the user or tech can get to without tear down. It may not be changeable

Ad

...check fuel filter but don't know of its location or how to check it. Fuel filters are not checked but just replaced. This must be fuel injected. Trace back from the fuel rail toward the gas tank. You ...

Ad

.... I examined the exterior of trans and found no external filter either . Please advise I did some checking and found that there is little to no info available,the only mention was that the internal ...

check, is normally, plugs, filters, (both oil and air), and the timing belt. Cost's depend on the garage, and can range from a couple of hundred, upwards. If you have some basic tools however, you can

...come on? No air is coming out. What could be wrong? check to see if the bower motar is working then check to see if a cabin filter is avalible if the bowers working the cabin filter is probably ...

Question about Motor 2002 Sonata

2 Answers

...check leaks and repair if necessary. NOTE The fuel filter is located underneath the car, near the fuel tank. Before servicing the vehicle, refer to the precautions in the beginning of this section. ...

...you checked the fuel pump relay? I agree check your fuel pump relay and also change your fuel filter anytime you do your pump you should do your fuel filter actually you should do the filter more ...

...check leaks and repair if necessary. NOTEThe fuel filter is located underneath the car, near the fuel tank. Before servicing the vehicle, refer to the precautions in the beginning of this ...

...vehicle jerking can be insufficient fuel supply in engine cylinder. Check for faulty or damaged fuel lines. Also check the fuel filter for any damage. Clogged fuel filter also result in

...is still not stuck to the block before you fitted the new filter. Check that the filter is not leaking around the rolled edge. Correct filter tension is until it touches the seal the 1/4 turn

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...