Questions & Answers for: check for carburetor 84 mustang

Question about 1984 Mustang

2 Answers

84 Mustang check engine light issue My mustang failed smog test because check engine light was burnt out($60). Took to my mechanic to fix and he says it doesn't have a check engine light. My mechanic ...

Ad

Question about 1984 Mustang

1 Answer

...84 gt with 5.0 4bbl. When i turn the ac switch on the climate controls the clutch for the compressior dosnt kick in and start turning. I checked the voltage at the electrical conection on top of the ...

Ad

...84 mustang to change the fuel pump Only if it is fuel injected !! I have a 84 mustang gt350. it both a cfi system. which is carburated and fuel injected. but I have two fuel pumps. there is a fuel ...

Question about 1984 Mustang

1 Answer

i need a wiring diagram for a 85 mustang gt 5.0 not efi its carburated You change the engine or intake? 84 was the last year for carb's on the Mustang.

Question about 1984 Mustang

1 Answer

84 mustang steering column diagram exploded view ...

Question about 1987 Mustang

1 Answer

...carburetor check carb float level if injected it could need the fuel pressure regulator adjusted you may need an after market fuel pressure regulator even with a carb especially if its not the stock ...

...carburetor, and fuel pump installed in my dodge aries 84, and still it wont start, why? Have you checked that you have spark at the sparkplugs? Have you checked if the fuel is indeed reaching the ...

...Check the fuel pressure at the Carburetor or fuel rail, depending on which you have.  Most likely the gas that was in the rail or carburetor has dried out and gummed up the injectors or needle ...

...84 mustang turned off car and went inside, came back out and engine wouldnt turn over. loud squeal occured when turning over key. is my engine siezed or do i need a new star was low on oil but didnt ...

Question about 1986 Mustang

1 Answer

...the carburetor and dies check HT leads firing order as you will probably have 2 wires crossed. ensure that the HT leads do not touch each other. Have a compression test done to check for valve ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...