...belt need to go back around another wheel or around that metal post that sticks out behind the roller brush? please go to the hoover vac store using the following link. you will have your exploded ...
...belt or not? I already have another vacumn so if it is going to cost too much to fix, I will just continue using the other one. Please let me know what the problem can be and I will try to fix it ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...belt is getting hot, then it is slipping instead of turning the brush roll. Check thge brush roll, make sure the ends are turning freely. Is the motor running ok? If it is then either the brush roll ...
Check to see if the belt is loose, or over stretched. Check the brush roll as well and be sure its securely locked into place. It could be slightly loose causing a lack of communication between itself
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions