phone cannot be used until put back on the main base. I have four additional handsets and they all lose the activation when placed on their charger. Kim - [email protected] USer manual requires, full
...phone 10 seconds. 3. you should see a message on the screen that says you need to push the "pager button" on the handset. 4. Push the pager button Unplug the battery and try again. Worked for me. It ...
...handset in the base unit for 20 seconds. NOTHING WORKS HELP!! You may need to "reset" the whole system. Do this by : 1 Unplug phone line, power to charger base, and remove the batteries. 2 Wait a ...
...unit press "Menu" then select "Registration" and press OK 4. You should get the message "press the # key on the remote handset". 5. Depress the "#" key on the unregistered 905 and it should
...the battery back in then place the handset into the base charger (NOT the spare charger) for a few seconds. watch the battery charging light on the base. it should flicker. after that try the
phone states no link to base move closer If “No link to base. Move closer to base, try again.” is displayed even when using the handset near the base unit, the handset may have lost communication with
...that actually works? firstly, try to use another charger, if the problem continue, you can replace the battery of the phone and if this still continue replace the charging port with a good one
...handset is registered, the phone works like others. Press Talk or a number key to answer a call. Press End to end a call. Press Talk and then dial your number to call someone. Enabling and accessing ...
Question about KXTG4731B KX-TG4731B KX TG4731B DECT 6.0 Digi
...phone line from the wall plugs into,which is located in the back of unit along with where the power cord gets attached. The second handset should have a stand/charger unit that should just plug into ...
Usually answered in minutes!