Question about GB4308 43" Rear Projection EDTV-Ready Television
TV has no vision , only one channel has sound I have a 5 year old Apex Tv, it does not have vision any more, but one channel still has sound! there is a red icon shown at lower left corner, shaped ...
Question about ADV3800 DVD Player/VCR
...reset switch available there either. I USE THE DVD/VCR TO CHANGE THE CHANNELS TO MY TV. THE REMOTE IS DOING NOTHING. THE SCREEN SAYS LOCK I have the manual and it is called "child lock" go figure it ...
don't know code I got this TV from my brother and the parental control lock is only blocking TV-Y7 broadcasts, and this TV is in my 5 year-old son's room. He doesn't remember the code. Is there any ...
Question about PF2020 20" TV
How to unlock my Apex TV #at2002 with only KEY shown in the corne it is an Apex television(#AT2002). There is only a KEY shown in the left corner of the screen. we hear sound but no picture when turn ...
channels or input. Please advise. Hello Your Apex Tv is locked. You must unlock it and reset all the V-chip settings once more. To unlock it do the following. Apex TVs use a four digit code to control
...channels how can i remove this if i dont no the pass code? Try code 0000 or 1234 to reset it. Otherwise try leaving the set unplugged overnight to see if the internal memory will reset. Good luck and ...
...channels never came back on. ..how do I fix it? unplug the tv and the direct cable box reset the box by plugging both the tv and box back in. MAKE SURE the tv is set on the right input for the box ...
...channels???? Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to ...
channels will not stop scanning. how do I reset my tv. Just unplug the TV from AC mains wall socket, and re-plug it back after 10 minutes or so. This must make it a hard reset. If you wish to get more
Question about Apex 32 Class 720p 60hz LCD HDTV - Black LD3288T
...The tv can't find channels on any mode and I have even reset the tv. I have the manual and contacted customer service but neither are any help. Have you set it on cable, it may be set for
Usually answered in minutes!
193 Questions
97 Questions
59 Questions