Questions & Answers for: channel sharp

sharp tv/vcr combo I was given this t.v. and I can't get all my cable channels and a couple of the cabel channels are different channel numbers than are for our cable co. How do I program my cable ...

channel 21. My Sharp LC-52D62U HDTV won't tune-in channel 21. I have cable TV and the coax cable is connected directly to the TV. I've done the channel scan several times but it skips over channel 21.

...Sharp customer service had me install Firmware Upgrade U0709111 which did not help. Has anyone else had this problem and gotten it fixed? If so, how? This is a problem with the ATSC channel's ...

...Sharp remote [without the converter box] it has the Fox HD channel as 45.1. Frankly, I found it by accident; and, I have no clue where the premium channels are, or whether other high definition ...

...channel 66. Sharp says digital TV won't talk to old analog VCR, suggests using new RCA cables. They worked on the old TV, and they work for channels 2 through 13. What's my best fix? using the ...

...I tune the channels and change the settings so tv1 displays on channel 1 etc channels? Here's the link to the full user manual. Cheers Rich ...

...Sharp TV remote(Up and Down buttons)It goes Input1,Input2 and channel 3,then starts over.Cannot change channels unless I enter the channel number.How do I get it to change channels using the up and ...

...channel scan option on the sharp LC-32SB24? During power up and first time use, there should have been an option for channel scanning as the initial setup wizard began. Alternatively, there should be ...

...that unfortunately. I have a Sharp Aquos, now connected to cable TV. It will only scull to channels 3 & 8. Every other channel has to be accessed by keying in the channel number. Any

...it here in the Philippines. When I placed the BSCS card, it only contains regions in japan. The channels are all channels in japan. Does anyone happen to know how to set the channels in the ...