Questions & Answers for: Akai channel scan

only two channels akai CFTD 2011 20in I only can view 2 channels one of which haas no sound I am directly connected to cable (no box) is there a master reset on this unit? no u nee dto scan for chs ? ...

...antenna you will need to do a channel scan. It is hdtv compatible, no need for a converter box but if you have cable TV or satellite, you still need to subscribe for the HD channels. Hope this

channel 29.1, if you go to http://www.antennaweb.org and type-in your address and then click continue on the next page it will show a list of all the broadcast antenna's for your area and how far your

Can't get digital channels on 37 We've had this TV for 2 years, and never was able to get any local channels - it is hooked up to satellite TV, but still couldn't get local channels to speak of. We ...

do not have original remote. tried to program my Dish remote Screen says "scan channels" but I can't make it do anything other. Even using the manual buttons on the side do not change the channels or ...

...channel scan. once complete use your remote and go up and down the channels in air mode it may find more than one. check and see if any of them are your dish box. If not then go back into the tv menu ...

My AKAI TV will only work on channels 2 through 12 or so, and there's many more channels that i should have. how do i fix or reset the tv? You need to go to TV channel scanning screen menu and select

LCT 2070 Tv We lost Manual to program channels We go to menu key than I go to scan channels but can't find the select or enter key doesn't seem to be a key for this. Lost remote so using a GE ...

connected the tv to cable and can't get it to scan for cable channels Make sure it is on channel 3. Then use the cable remote

channel's? Auto scan does not work. To scan for digital channels on your Akai PDP4298ED1 TV, you can follow these steps: Press the "Menu" button on your TV remote. Use the arrow buttons to select the