Questions & Answers for: changed plugs wires buick 3800

Question about 1990 LeSabre

1 Answer

...plugs My Bonneville 3800 did the same thing. My brother-in-law (mechanic) told me to change the coil pack module (3 coils sit on top of it). I got a module from a wrecked 3800, put it in, engine runs ...

Ad

...buick regal 3800 run for about 10 seconds and die ,a blowing noise coming out of the motor sounds like you have a severe vacuum leak, causing a lean condition. The car runs for a short period because ...

Ad

Question about 1998 LeSabre

1 Answer

...backfired out the air cleaner do i need to change the plugs any ideas? Change plugs check wires for correct connection. Check pcv for vacuumn leaks. Starter fluid on mass air flow meter may damage

...buick le sabre with a 3800 auto tranny. i replaced the plugs and a couple of rotten vacuum lines, could this be injector problems? it starts perfect runs great but exhaust sounds almost like a bad ...

...Buick Lesabre 3800. It stalls when in reverse..or when decelerating it just dies. I have replaced o2 sensor, spark plugs, and put a new air filter...it still stalls and dies after it is warmed up. ...

my 3800 series 2 would not start it died on me in my 3800 series 2 would not start it died on me in the street the radio and heat comes on but it would not start check fuel pump

...car runs great. When it get hot it cuts off but starts right back up. I have changed the plugs and wires and I have changed the fuel filter. This is such an annoying problem Try a new crank

Question about 1997 LeSabre

2 Answers

...changed the spark plugs and wires Can you confirm the firing order? Sounds like a wire is crossed...as the motor had a smoother idle and operation prior to changing the plug wires...your parts store ...

Question about 1997 LeSabre

1 Answer

3800 buick starts dies 1993 buick riviera starts then dies 4 things needed to keep engines going: Fuel, Air, Spark, and compression. Any codes? Check engine light on? When was last time you did a tune

...just like it 3800 II it cranks and cranks but will not start im getting gas but no spark what is it is it the crankshaft position sensor???? It could be a bad spark plugs, plug wires or even the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...