Questions & Answers for: change throttle pot mobility scooter

...throttle pot or the speed control pot My leanings is toward the throttle pot since it works in reverse with the speed pot not being changed but not forward. when you are just changing the position of ...

... the throttle pot , not the speed pot, that is the lever is fixed to, you push to go forward or backwards, please can you tell me the make and model of this scooter ? Regards Rob ...

...is dead centre, got a meter ? then disconnected the throttle pot connector and measure one outside pin to centre pin , it should measure around 2.5k ( resistance) Regards Rob ...

...throttle lever and pot has moved off centre slightly...you need to make sure the cross head located on the bottom of the pot , a metal stem that the throttle lever fix to is dead centre to you when ...

...to know how to replace the power pot on a pride victory 3 wheel electric scooter hi, do you mean the throttle pot or the speed pot ? located on the tiller panel .. Regards Rob ...

brakes without warning 7 blinks error code hi Throttle pot issue.... check wiring otherwise replace the pot ... Regards Rob www.gewizrepairs.co.uk

...legend suddenly stops and emits 7 beeps hi , that is a throttle pot error, check the pot itself to make sure it's not come loose and check the connected wiring ... Regards Rob ...

throttle pot Spring broken on my echo 3 shoprider.How do i install a new spring for a throttle pot? Hi, if you are based in the UK i can install one for free of charge however you will have to pay the

... if you mean the centre location of the throttle pot you must get the slot dead centre to you( meter reading of about 2.5K ) ...when you 're sitting on the scooter... Regards Rob ...

...throttle was installed on an angle you will not have full range of the lever. As for seat lift guy, change your speed up and the motor speeds up, have it slow and you might not think it is working. ...