Questions & Answers for: change settings device feeding tv

...feeding live signal (a VCR, DVD player, or game console) to the RCA connector input on the back of TV for Video 1 and Video 2. I then used the first menu option which I accessed by using the Menu key ...

...settings that I can think of. Also, when I turn my TV on the monitor goes blank. When I shut the TV off the monitor comes back on but I still get nothing but a blank screen from the TV either way. I ...

...Change TV audio reception from 6.5Khz to 5.5Khz. This was a UK TV which is now in Malaysia. Picture is good but no audio reception because Malaysia uses 5.5 Khz as a carrier wave. The UK uses 6.5Khz. ...

...your video. I called the cable company and they guided me through changing the menu on the cable box...seems that even if your tv is set up right, your cable box can change the settings

...TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows: NOTE: Some TVs have a reset button. If available and ...

screen blinks 8-10 times & can not change channels make sure that the remote control is set to the correct device. feed back

...TV has an AV input for connecting a device like a VCR or DVD player, you can probably connect the digital box that way. Most boxes provide stereo audio and video outputs, and you will get a clearer ...

...change the input mode? You could try a universal remote and it might let you select the aux input on the front of the set. If this doesn't work you could try an RF modulator that would feed the ...

...TV's with sound systems will not match. You will need a separate remote for each device. A solution that may also work is using a universal remote that can do cross control. You can set up this ...

change the resolution to 720px and above on this television???? What is your signal source and cable type? If your signal is being transmitted by a composite video cable, you need to upgrade the cable