Questions & Answers for: change sanyo tv channel 3

SANYO TV set and the set will not allow it. The stations only go to 68. Can you tell me how to do that? pg 13 of inst. book, item 3 says to add cable chs hold the 1 key until C1 appears then enter the

...through the converter using its remote control after that. If you change channels on the TV itself and go off channel 3 or 4, the TV will not get a signal and will show you that "no signal"

...Sanyo television and would like to know how I can change form channel 3 to AV1 to watch my satellite FIRSTLY consider buying a remote @ $44.95 only get connected to ...

change the channel to video 3. I called sanyo support. I rebooted the PC, rebooted the TV, but still cannot get the Video3 sound to work on the HDMI1 channel. The Tech also instructed me to set the TV

...sanyo tv. Slightly older. Not hi-def or New I have a sanyo tv. Slightly older. Not hidef or flat screen. However, I have direct tv and the tv is usually opperated through the directv remote. My 3 y/o ...

...sanyo ds25320 tv that is stuck on the aux channel and will not change to reg tv. You will, of course, need the original remote. At one time you could purchase a Sanyo universal remote. I'm not ...

sanyo tv that was under warranty that the picture went out on. Sanyo sets have a horrible track record, if the set is still under warranty return it. The problem could be in either the power supply or

...Sanyo manual: How to set the DVD+VCR's RF output channel 1. Set the TV to the VCR channel (3 or 4) depending upon the selected channel. 2. When the DVD+VCR is turned off, press and hold CHANNEL (V/v) ...

sanyo tv will not change channels i have a sanyo tv dont have the remote i was getting all channels with cable its stuck on 1.1 cant get it back to channel 3 to watch cable

...Sanyo to infinity cable. Can only get 1 channel. you may be trying to change the channel with the TV remote. The TV probably needs to remain on channel 3, then switch to the Cable remote (make sure ...