Questions & Answers for: change plug wires 7 1990

...plug wires were replaced The firing order is 1-8-4-3-6-5-7-2. The distributor rotates in a clockwise direction. The engine must be on the compression stroke on the #1 cylinder. Line up the timing ...

Ad

...plug wires. You have replaced some common problem areas for this situation but the plug wires are the most susceptible for causing a miss after engine is warmed up. Try replacing the spark plug wires ...

Ad

...plug wires hi my boyfriend dosent know what happend and im not asking questions i just need help !! he has a 1990 z71 with a 350in it... they didnt put the spark plug wires to the cap and roter back ...

Question about 2003 Silverado 2500HD

1 Answer

plug on, i have 7 plugs on truck and 4 on plug i bought need to no color codes. 7 pin standard codes: Blue Brakes, Black 12v power, white ground, red right turn, brown left turn, green marking lights,

Change plugs and wire and engine will not acclerate. This is a built 350 short block chevy with pro charger. 350 Chevy engine in what? 1990 Corvette? Who built it, did you? Sounds as though you have ...

1990 chevy p/u took one wire off at a time and it will not start what is the firing order on dist. cap I know firing order on engine is 1-8-4-3-6-5-7-2 Is the coil connected to the ditributor? did you

i recently changed the plugs on the car and now it will not start. do i also need to change the plug wires you need to makesure the right wire is on the right plug

...1990 chevy lumina 2.5L engine, it will spit sputter and backfire through the intake if you give it too much gas or try to pass someone, if you ease into the throtle it runs fine, could anyone help. I ...

...plug wires one at a time, for replacement. Fig. 1: 5.0L (VIN Y) Engine Engine Firing Order: 1-8-4-3-6-5-7- Distributor Rotation: Counterclockwise Fig. 2: 5.0L (VIN E) and 5.7L (VIN 7) Engines Engine ...

...1990 chavy Suburban is having poping noise after changing the wires and plugs and will not start what is my problem. You installed the wires wrong Should have made a diagram before removing the old ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...