Questions & Answers for: change plug wires 1992 oldsmobile

...change a starter in a 1992 oldsmobile cutlass ciera i need to know what all is involved in changing the starter on a 1992 oldsmobile cutlass ciera disconnect battery,three bolts hold it to bell ...

...wires now car wont start i have a 1992 oldsmobile cutlass ciera i replaced spark plugs and wiring now car wont star. what could be the problem?? Make sure wires are in correct order for firing. Also ...

...plug wire goes in what order on the cyclinders 1992 Oldsmobile Cutlass Supreme FWD 3.1 liter DOHC V-6 VIN "T" 1992 Oldsmobile Cutlass Supreme FWD 3.4 liter DOHC V-6 VIN "X" Hope help with this ...

plug wires & must have switched order 1992 Oldsmobile Delta 88 3.8 liter V-6 VIN "L" - Identifying Ignition Types I and II On Type I coil packs, three twin tower ignition coils are combined into a

...change my plugs and wires? but im pretty sure my car has coils. thanks Mike have you got a good spark- take out a plug and lay it plugged into the lead on top of the engine so the tip is earthed ...

...1992 oldsmobile cutlass cirea its one of 4 relays under the hood along the side could be in the left front wow its been a while. Check your horn if it is getting voltage with a test light at the wire ...

...plug wires go back on 1992 oldsmobile 88 royale not sure if new wires are on right follow this link and register ,its free , enter vehicle details and i'm sure the info you require will be ...

...plug wires go on a 1992 oldsmobile 88 royale need to see if new wires are correct on 1992 oldsmobile 88 royale This is an explanation of the entire ignition, but includes wiring for the V8 Ignition ...

...plug wires go on a 1992 oldsmobile 88 royale need to know how plug wires go back on 1992 oldmobile 88 royale Intake manifold normally has firing order cast in, or get a shop manual. The hard part can ...

...Wires are good. Tried injectors, they are good. Could it be the ignition module? Question edited for clarity. Question moved to model category. That is the most likely but first try moving the plug ...