Questions & Answers for: Turbo Air change pcb

freeze will not run doors heat nothing else Will not run at all control board has capacitor swollen at top and leaking wax looking stuff That is known as a puffed capacitor and usually indicates a ...

runs but blows warm air ran for 1 year unplugged for 2 months plugged in ran warm grill was dirty now cleaned still runs warm make sure the compressor is running if not change over load and relay

msf-49nm freezer will not go below 34 degrees farenhight Change the temp control,check to see if it is iced up on the evaporator

the compressor stop at 58 Change the temperature control. http://www.acmehowto.com/howto/appliance/freezer/repair/tempcontrol.php

...but unit was still in defrost i had to hold defrost button again to get it to come out of defrost. Change the defrost

...the main control board to be bad. **No offense everyone, but more often than not people want to change the main control board first and it is generally not the problem. Don't change the most ...

How to change door gaskets. DEPENDS ON UR TYPE OF FRIDGE BUT MAYBE THESE PICS WILL HELP SOME ARE THE SNAP IN KIND SOME SLIDE ON AND SOME SCREW ON

...change this setting? Apparently the same control PCB is used for the refrigerator and freezer, but the setting of the PCB is 1 if fitted in a freezer and 0 if fitted in a refrigerator. Does anybody ...

...with the compressor its start and it goes off and its not cooling the fan stays on but no cool air Change the relay and over load also washed the condenser coil You most likely need a start relay, ...

Turbo Air Model TGF-23F Wont get cold. Compressor comes on and runs but evaporator fan isn't running. I can see the evaporator starting to ice up but fan never comes on. Measured a/c volts at fan plug