Questions & Answers for: Nokia change pcb

when i checked its PCB i found both points where charging touches is showing shorting, i removed everything upto diode, but i am able to remove shorting on charging points try to change charging pin..

...problem on the pcb first check ur pcb clean the pcb if problem still stays with the phone then check tracks of keys to system connecter or change flux which connects upper and lower part of the

...3250 keypad 1, 4, 7 and * are not working In lower part on the other side of PCB with player`s keys You can find 25-pin glass IC. Change it. It`s an usual EMI-filter the same as on the Main PCB

my cell is hanging on the startup screen..nokia 2600 pls chek key pad filter, if any daimege then chang it or clean soket whear keypay pcb inserted,do it 100% slove this problem. apnaamit

nokia 5200 in mic problam mic not working first check the mic ,mic contact if it is ok then check the track form mic coil,which is embeded back side of the PCB IF IT IS dameg chang it,or put th jumper

...from PCB, still the problem is not be cleared,keypad keys of menu,i,2.3 are not functioning, please guide me to clear this problem n 73 camera swich not working problem plz help me change the

3110c memory card not working 3110c memory card slot not working clean PCB change memory card slot if complent change memory card IC

...between PCB( engine board) with Buzer.it places behind the PCB. so, you need to open phone screw.open up carefully than check buzer connector, if still not works it means Buzer need to

...just but ribbon cable only, replace it, but better you change all sub pcb for display, normally complete coming with joystick together, but without camera unit. Just replace it. The cost i'm not

...just but ribbon cable only, replace it, but better you change all sub pcb for display, normally complete coming with joystick together, but without camera unit. Just replace it. The cost i'm not