Questions & Answers for: Konica Minolta bizhub change offset

Printing Problem Hello, My name is Tangela and I have a bizhub 250 copier. When I make a copy of a document, the copy comes out with other writing on it as if there was writing on the blank copier ...

Want to change default settings for scan I want to change my default settings for scanning. Right now it is on Auto for size. I want to change it to default to scan at 11x17. Does anyone know how to ...

in minolta bizhub 350 pc drum change plz change pc drum Two Options: 1) Reset the PC/life; I/C Life and DV counter and run F8. 2) The same than before but change the PC drum. by : George Rivas ( OSI )

can't get transmission report on bizhub 250 to print in Portrait to change the tray that reports print from it can be changed in service mode soft switch 323 change bit 7 to a 1 to print from tray 1 ...

Konica Minolta C450 status is offline. We have reinstalled the drivers, changed servers, changed network cord. We cannot print from our network computers to it, however, we can scan from the ...

how do you change the language setting to change the language 1 press the utility/counter button 2 touch user setting the top left button on the touchscreen 3 touch users choice the left button on the

I want to change the network card change the network card? or change the settings of the network card?

error c3452 error c3452 is fusing warm-up failure. first do trouble reset. second, check H1 or H2 third, check TH1 and TH2 four, change new fusing unit five, change PU six, change PWB-A

change c352 admin password Bought used scanner / copier, unknown admin password, need to change IP address. Need default administrator super code to bypass unknown admin password. Mr. Gates, yes there

...offset adjustment three times in total (including two retries), the value is out of the specified range. Remedy 1 Reboot the main body. 2 Clean the original glass. 3 Check the connector CN102, CN103 ...