...change the tension, thread, needle and oiled my machine. Still to no prevail. I can't see paying 50-100 dollars to have it brought in and fixed when it only cost 150-200 dollars for a new one. How ...
needle that has seen quite a deal of work, or you suspect it may be blunt, change it for a new one ! TOP TENSION & GUIDES: Makesure that when you thread the machine the presser foot is up so thethread
needle that has seen quite a deal of work, or you suspect it may be blunt, change it for a new one ! TOP TENSION & GUIDES: Makesure that when you thread the machine the presser foot is up so thethread
...needle, same thread, same material, made top hem started bottom thread looks great on side thats up, when I turn over there is a huge thread nest have rethreaded several times, taken bobber out ...
Question about XL-5130 Mechanical Sewing Machine
...change the needle, make sure it is in properly (flat side to the rear) and make absolutely sure you have threaded it properly (presser foot raised when threading so the thread gets into the upper ...
Question about XL-5130 Mechanical Sewing Machine
...sewing machine fix-it people and they told me that the timing was off. Things needed to be aligned. Can I fix this myself without spending over $80.00, the price I was told. Sometimes fixit people ...
...change needles thread might be caught around spool pin -tension dial needle & thread may not be compatable-try this & see if it works for you Cut 6-8 inch piece of thread of the spool you are ...
...material. have you tried changing the needle-if the needle has a flat side goes to the back of the machine-round needle the groove faces away from the shaft check the top thread tension usually 3 to ...
Question about XL-5130 Mechanical Sewing Machine
xl 5130 to adjust the bobbin use the top tensionalso try rethreading the machine top, using every thread guide & bobbin making sure to insert the bobbin correctly into the bobbin casealso try
skipped bottom stitches try changing the needle make sure the bobbin is inserted correctly make sure the bobbin is not warped make sure the bobbin is turned the right way in the bobbin case make sure ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions