Questions & Answers for: change intake manifold gasket 1991

...ACCORD EX Engine keeps revving only when its in park. change your fast idle thermo valve Check your throttle positioning sensor or MAP sensor. you could have a vacume leak check your intake ...

...gasket is get WD40 or Brakleen or soemthing like that, and spary it where the intake manifols bolts to the block. If you hear a change in the idle speed (faster or slower) just change out the

...1991 Honda Accord LX.Hope this helps. the engine should have the firing order on it and same with dist cap and sometimes the wires are also numbered. just match them up number for number even the ...

...intake manifold where gaskets fitted and observe the idle speed, once the idle change or encrease, definetly there is air leak and you have check the gasket or replce it if necessary. But if doesn't ...

intake manifold. You do not need to unbolt the thermostat housing bolt to the intake manifold, because the cylinder head will clear the engine block lifting the head in angle.  The

...said tps is bad if your still showing a tps sensor fail then you may have faulty wiring, i have done alot where this is a sign of intake manifold gasket failure making the vehicle have unstable

...CHANGE IN THE ROUGH IDLEING? WHAT ELSE MAY IT BE?? Clean your fast idle thermo valve (fitv) if that dont Work try cleaning idle Air control valve (iacv) you can go to google images to see where they ...

...intake manifold. Sometimes they rot right through. Very embarrassing when you've already replaced the head gasket. (Trust me I know) Also,I've seen quite a few Hondas with faulty ...

...honda accord is leaking coolant from a hose under the manifold. I want to know how to change the hose. get under the car move things on your way to get to the hose and take 2 clamps off no big

is there a torque spec for the plenum nuts going on the intake manifold studs? on 1991 honda accord 2.2 l there is a gasket in between plenum and intake manifold. 14 in/lb