Question about DX-LCD19-09 19 in. LCD TV
t do is change which input you use, but the menu, volume and channel controls all work fine. The code best suited to work is 10463. CONTACT DIRECT TV FIRST IF THEY DON'T HAVE A CODE , YOUR OUT OF LUCK
...signal om Dynex tv no signal on the dynex tv after watching a movie. What do I need to do to fix this? must have pushed something to change this. Press the Input Button on the remote until you see ...
...it the tv or direct tv comes with the hook-up cables. try one of those and remember the TV input where you plugged in the direct tv box then on TV remote or front function button change the input.
...to dynex 32 inch tv. what i connected dvd player to dynex 32 inch tv. what setting do i put tv on to watch dvds You should be connected to the AV input 1 slot. Change the input on the TV to Input ...
...a vcr. then just plug the vcr into the aux inputs, either change the channel until you get to 'video 1' or something similar even 'aux' or on your remote press either 'input' or 'video' to get ...
...change the input to AV1 but can't seem to do so. I hit the 'input' button, then scroll to the AV1 input, but not sure how to input this. Makes no difference if I just hit the input button again, or ...
...input set to TV, press Menu. Select the Channel submenu and press Enter or down arrow. Set the TV mode to Antenna (use the left/right arrows to change the value). Then press the up/down arrows to ...
Question about LT32HVE 32 in. LCD Television
...has the audio/video jacks for output of signal on its rear side connect to a unused video input on rear of set--go to that input and change channel via the box---BY PASS THE TUNER IN THE SET THIS
Question about LT32HVE 32 in. LCD Television
I am using a Dynex TV and need to change the input to HDMI. I can get to the HDMI choice on the scroll down but don't know how to enter my choice. should be an input button on the rmote
Question about LT32HVE 32 in. LCD Television
...input button on the TV). Use the Up/Down (or the volume on the TV) arrows to select Closed Captions and press Enter. The highlighted menu item should be CC Mode. Use the Left/Right arrows to choose ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions