Questions & Answers for: Hayward change handle

...so unable to change functions. I have to keep dismantling it in order to get it to move. u may need to replace the spring under the handle. u can also replace the whole handle assembly for around

...POSITIONS TO SEE IF THERE IS CHANGE THERE IS A WHEEL UMDER HANDLE THAT MAY BE OUT OF POSITION TRY A COUPLE OF ROTATIONS START PUMP AND THERE SHOULD BE A CHANGE NEVER TRY TO MOVE HANDLE WITH PUMP ...

we have found sand in the bottom of our inground pool we have a hayward pool sand filter what could be the reason have you added sand to filter if so may be to much make sure that handle is in the ...

...The multi valve handle on my hayward pro series sand filter gets jammed apparently with sand. I changed the multivalve headand the fingers inside the filter which did not solve the problem.I have ...

The handle on the multi-port valve S244T filter is loose (it offers no resistance to being moved up & down). However changing port is exteremely difficult and requires two hands. What is ...

Changed sand now the multiport valve is leaking at very top? Is it leaking at the joint between the tank and valve, between the two halves of the valve, or from the center of the valve (around the ...

...setting to rinse, turn the pump on for a couple seconds and then back off, change the valve setting to filter and return to normal operation. NEVER move the valve handle while the pump is on. ...

out the backwash line). Now, it is leaking around the diverter valve handle. What do I do / change now? Your best bet is to replace the whole top assembly as the plastic top probally is etched and bad

...change fil prositions the white ring under handle bnoke Find the position where the pin that runs through the handle lines up with the slots in the valve top. Drive the pin through the handle with a ...

...handle that you use to change from filter to backwash etc has snapped. Do I need to replace the whole unit or can it be pulled apart & replaced separately slide out pin replace if you go to ...