Questions & Answers for: change door lg dryer

...using the dry finger on other hand to hold the door switch start the dryer and using wet fingers place on both sensors, if it doesnt change to damp or wet it could be the sensor or the user

...to change the door swing. the only thing you can do is move the washer and dryer position by getting longer hoses and venting so you can have the washer on the left and the dryer on the

...door closes to. Look at the piece on the door. You will probably find it is bad. You can buy just that piece and change it. I hope this helps. If I can assist you further please let me know. Thanks ...

...change a belt on a LG Dryer - DLE2101W UNPLUG the dryer. Take the front kick panel off. Take the door off. Lift the top and rest it on something. Remove whatever is in front of the drum. Remove the ...

...change the drum rollers? never lubricate a drum roller ,it will attract lint and hold it like a magnet possibly making your problem worse. graphite lube possibly - as used in door locks.but this will ...

...lg dryer? The door switch might be bad or, out of alignment or, "gunked up". The sensor wire to the door switch might have come loose or broken - check the continuity of the wires (Ohme them from end ...

LG dryer doesn't turn on Dryer does not turn on, their is a light in the drum. already checked voltage, changed fuse, changed main board. Please help is the door switch ok?

lg dryer doesn't turn on it has a light in the drum. already checked voltage, thermostat, replaced main board and still does not work. Having changed the main control board, the only other things to ...

...LG GAS DRYER NOT ADVANCING TO COOL DOWN CYCLE? MY DRYER RUNS DOWN TO 6 MINUTES AND THEN AUTOMATICALLY RESETS ITSELF TO 16 MORE MINUTES TO RUN AND NEVER SHUTS OFF UNLESS I OPEN THE DOOR. IT IS NOT ...

...is the drum light limits and thermostats not open, door switch and belt switches good, 240 v present at control, replaced boards, no change Did you try the door switch if it is bad it will not ...