Questions & Answers for: Gates change cvt belt

engine revving when doing 10 mph the engine revs high , just had timing belt and altenator belt replaced sounds like the stop pin has been moved check on the throttle there is a little stop screw see ...

...belt is kind of loos i change a new one and also change a new tensioner and a new pulley but still have my belt loos i do have a 1999 grand marquis w/ belt problem beltdoes not have enough tension i ...

...belt tension problem i did change a new tensioner and also a new pulley still have the same problem . If the belt worked properly before then it may have stretched and needs to be replaced. If you ...

...it does not engage other gears when i shift to Drive It seems that stayed on 1 gear and could not change to other gears which resulting in high rev of about 2 to 3 thousands RPM and a speed of 20

how to replace a 2001 toyota corolla drive belt? put wrnch on tensioner pull tentioner away from belt remove old belt with new belt in same route and release tensioner

...belt how to change you will need a 15mm long spanner ,look at the drive belt and you will spot a pice of metal sticking out fit spanner on and pull it hard and belt will come lose remove belt with ...

The park light flashes after I drive a little while? your parking light has 2 possiable problems. #1 could be a wire that is loose of comes in contact with something else. simple fix. but hard to find

...change idler pulley .When i start engine a squealing noise begins. I also had smoke which smelled like burning rubber must be one of the pulleys to make the squealing noise .Alternator seems to be ...

...change the serpetine bealt tensioner on 99 audi a4 quattro 2.8? do i have to take offf the whole front end? No, go to your nearest auto parts store and purchase a serpentine belt tensioner! You might ...

...codes , if any , clear them, as claering the codes can sometimes be all that needs doing , if no change post the codes and will be able to locate the sensor/switch causing the issue , another