Questions & Answers for: change cord iron

Ad

Question about NI-R73NR Iron

3 Answers

...change cord with new one. maybe your line cord is open or try to find the fuse inside the iron. Retractable cord and reel unit loses contact to the main wiring unit within the Iron. If you opened the ...

Ad

I want to change the cord but I can´t open it may be your iron is a disposable

Ad

...near Woking Surrey? Is there somewhere who will do repairs/ you can repair it yourself. it's easy. you just need to change the whole cord. open the iron and add new cords and you are goo to

Question about Powerglide DE011 Iron with Auto Shut-off

1 Answer

...on if i push the cord in on the iron real hard cant iron and push a cord in at the same time Time to change the cord!! And stop pulling it out of the socket by the cord, pull it out by the plug ...

Question about Power Duo Iron

1 Answer

...change a broken cord? if the cord is broken get anew one, cut of the part that is broken attache the wires in this order red to red or brown {live} black to blue{nuetral} and green to green or yellow ...

Question about Shark GI490 Iron

1 Answer

...change the cord of the iron ? Remove the back plate where the cord attaches to the iron... there are 4 screws visible and another 2 screws hidden under the two rubber feet...These are joined together ...

Question about Shark GI490 Iron

1 Answer

...ends from the plug point to the iron terminals must you change the cord. If there is no continuity to the coils then the coil or the thermostat is open. This can be checked easily with a

Question about Steam Xpress AS250 Iron with Auto Shut-off

1 Answer

...Once you can open the iron and access to the cord you may change the power cord. it is easy. Power goes on & off because the power cord is broken. This failure is very common on irons. Good ...

Question about Steam Xpress AS250 Iron with Auto Shut-off

1 Answer

...cord. However you need to disassemble your iron to make the change. I would only recommend trying this if you are familiar with doing such a task, you wouldn't want to risk a misfire and causing a ...

Question about NIA56NR NI-A56NR Iron

1 Answer

replace cord the cord has a break in the cover so it shorts out. I need to change the cord yes you can change it or you can also take some repair.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Irons Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34956 Answers

ray gallant

Level 3 Expert

70831 Answers

Are you an Irons Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...