Questions & Answers for: Bernina change casing

...Bernina authorized dealers ever since I bought it new. I use Mettler or other high quality thread, change the needle more than I changed my children's diapers and nothing helps. Every time I sew I ...

Tension Just recently bought a bernina 1008,and the bobbin tension has just started acting up,it is too loose,i tried everything to fix it,changed the bobbin,changed the bobbin case,re-threaded a ...

...Virtuosa 155 and use it daily. Without I have a Bernina Virtuosa 155 and use it daily. Without any changes in thread or bobbin.. all of a sudden my bottem stitches are loose. In checking the bobbin ...

Needle hitting bobbin casing when sewing. I broke a needle on a pin while sewing. after I changed to a new needle it is now hitting the bobbin casing below and will not sew. i looked for broken pieces

Make sure that the top of the bobbin case is at the top of the bobbin case holder and make sure you change the needle as it will probably be dull or bent from hitting the metal of the bobbin case

My bernina (home art edition 160) needle just hits the case where the bobbin goes in, didn't know if anyone knows how to fix this? if you've changed the needle & it still hits the bobbin ...

the lower tension on my bernina 1005 stitches ok for a couple of inches then goes loose for a bit and then back to normal - normal checks done including a new needle? Is your bobbin case a genuine ...

how do I change bobbin tension on a bernina 830 Where does the multifunction tool go Generally the tension on the bobbin is set and the tension on the upper thread is balanced against it. To set the ...

My Bernina 1630 A straight pin was struck by the needle and went into the needle hole. I changed the needle, but the bobbin tension is loose. Is there an adjustment for bobbin tension? There is. It's ...

Bernette 65 I have changed everything. Top thread does not grab the bobbin thread. Was sewing fine then clunk. Did the case break off something. No pictures for reference on bobbin case. It sounds ...